how to properly use a bidet

Using a smart bidet toilet is usually quite straightforward, but the specific steps may vary depending on the brand and model. Here are some basic steps and tips

1 Power Connection: Make sure the smart bidet toilet is properly connected to the power supply.

2. Seat warming: If needed, the seat warming function can be activated through the remote control or the control panel on the side of the toilet.

3. Automatic lid opening: If the smart bidet toilet has an automatic lid opening function, the lid will automatically open when you approach.

4. Sit down: When you sit down, the seat sensor will detect your presence and may activate other functions.

5. Flushing Function:
- Frontal Flushing: Usually used for female cleaning.
- Rear Flushing: Usually used for regular cleaning of both men and women.
- Use the remote control or control panel to select the desired flushing function, and the nozzle will spray warm water.

6. Warm air drying: After washing, you can choose the warm air drying function to dry the cleaning area.

7. Automatic Odor Removal: If the smart toilet has this feature, it will automatically activate to reduce odors.

8. Automatic Flushing: Some smart toilets will automatically flush when you stand up and leave the toilet.

9. Close the toilet lid: After use, you can manually close the toilet lid, or if the toilet has an automatic closing function, it will close automatically.

10. Cleaning and maintenance:
- Regularly clean the toilet surface, especially the control panel and remote control.
- Follow the instructions in the user manual to clean the nozzle and internal pipes.

11. Troubleshooting: If you encounter problems, such as a function not working, check the power connection, refer to the troubleshooting section in the user manual, or contact customer service.

Remember, the smart toilet is designed to provide convenience and comfort, so familiarizing yourself with its functions and using it correctly can greatly enhance your experience.