BBbidet E75 Elongated Smart Bidet Toilet | P-Trap & S-Trap
Estimate delivery times: 3-5 days International.
Free shipping & returns: On all orders over $300.
Couldn't load pickup availability
Specifications & Certification
Description
E75 Elongated Smart Bidet Toilet with Dual Water Inlets
The BBbidet E75 is an elongated bidet toilet with a built-in bidet, heated seat and warm-air dryer. Its 705 mm (27.76 in) D-shaped design combines the toilet and cleansing functions in one complete unit, with dual water inlets, a built-in tank and P-trap or S-trap options. The E75 High configuration also includes automatic lid opening and instant warm-water washing. Independent flushing and cleansing water inlets keep the two supply paths separate, while the built-in tank supports consistent flushing performance.
Bidet Toilet with Dryer and Heated Seat
- Hands-free operation: automatic lid opening, capacitive foot-sensor lid/seat operation and foot-sensor flushing.
- Personal cleansing: rear and feminine washing with instant water heating.
- Comfort after washing: a heated seat and warm-air drying.
- Daily convenience: intelligent full/half flushing, foam shield and deodorising function.
- Simple controls: digital display, remote control and a prolonged-sitting reminder.
Warm-Water Washing and a Removable Nozzle
The integrated bidet provides rear and feminine washing without a separate bidet fixture. The removable nozzle tip gives access for cleaning; follow the supplied care instructions for removal and maintenance.
E75 Dimensions and Water Connections
| Measurement | Millimetres | Inches (approx.) |
|---|---|---|
| Length | 705 mm | 27.76 in |
| Width | 390 mm | 15.35 in |
| Height | 455 mm | 17.91 in |
P-Trap Wall Outlet or S-Trap Floor Outlet
Choose the drainage configuration that matches your bathroom. A P-trap connects to a wall outlet; an S-trap connects to a floor outlet. These are alternative installation configurations, so confirm the connection before ordering.
- P-trap: check the wall-outlet centre height from the finished floor. The E75 wall-outlet specification is 180 mm (approximately 7.09 in).
- S-trap floor outlet: measure your toilet rough-in from the finished wall to the centre of the floor waste outlet. The E75 selector lists 10 inch, 12 inch, 14 inch and 16 inch rough-in toilet configurations. If you are looking for a 10 inch rough in toilet or comparing the larger rough-in options, send us your exact measurement so we can confirm the matching E75 configuration and connector before ordering.
- Water supply: allow for independent flushing and cleansing water connections.
Choosing a 10 Inch Rough In Toilet
If you are looking for a 10 inch rough in toilet, measure the actual wall-to-outlet distance before ordering: 10 inches equals 254 mm. A nominal 250 mm label is not an exact conversion. Send us your measurement so we can confirm the appropriate E75 configuration and connector. Apply the same check to the other listed S-trap sizes; do not assume that rounded metric labels guarantee installation compatibility.
Check Your Bathroom Before Ordering the E75
- Measure the available floor space, door clearance and room for the lid to open.
- Confirm wall or floor drainage and the exact outlet position.
- Check both water inlet positions and the electrical supply with your installer.
- Send photos of your existing toilet, drainage connection, water inlets and power socket so we can check the installation arrangement.
Ordering for Your Country
Before ordering outside Hong Kong, contact us to confirm delivery availability and charges, the required voltage and plug, and compatibility with local drainage and water connections. The Hong Kong delivery, installation and measurement service does not apply to overseas orders.
Hong Kong Delivery and Installation Service
For Hong Kong orders, the HK$7,980 price includes delivery and installation. Plumbing alterations and electrical modifications are not included. After placing your order, you may request a complimentary on-site measurement visit if needed; contact us to arrange it.
E75 Product Questions
Is the E75 a complete bidet toilet combo or a separate bidet seat?
The E75 is a complete bidet toilet combo that combines the toilet and cleansing functions in one unit. It is not a separate bidet seat or an attachment for an existing toilet.
Does the E75 have a heated seat and warm-air dryer?
Yes. The E75 High configuration includes a heated seat and warm-air drying. Use the warm-air dryer after rear or feminine washing, and operate the cleansing and comfort functions with the remote control.
Does the E75 have a built-in tank?
Yes. It has a built-in water tank and independent water inlets for flushing and cleansing.
How much bathroom space does it need?
The unit measures 705 × 390 × 455 mm (approximately 27.76 × 15.35 × 17.91 in). Allow additional clearance for access, door movement and lid opening, and have your installer check the layout.
How do I measure the toilet rough-in before choosing an E75?
For an S-trap floor outlet, measure from the finished wall to the centre of the floor waste outlet. For a P-trap wall outlet, measure from the finished floor to the centre of the wall waste outlet. Read our toilet rough-in measurement guide for illustrated steps and 10, 12, 14 and 16 inch rough-in guidance. Confirm your exact measurement and the selected E75 configuration before ordering.
Compare Smart Toilet Sizes
Need a shorter toilet for a compact bathroom? Compare the K80 590 mm compact smart toilet with the E75's 705 mm length, or browse our smart toilets and bidet toilet combos.